EFOY Pro Accessories
This adapter is required to connect the fuel cell to the M28 fuel cartridge.
Fuel Cartridge Sensor
The fuel cartridge sensor FS1 monitors the level of the fuel cartridge and indicates if the fuel level drops below the position where the fuel cartridge sensor is positioned at the fuel cartridge. This early warning gives the user time to change the cartridge before it is completely empty and the fuel cell stops.
The cluster controller CC1 is intended to be used with EFOY Pro fuel cells. The cluster controller gives the possibility to operate up to five EFOY Pro units in parallel, ensuring each EFOY Pro runs simultaneously with the others.
The GSM Modem is used for remote monitoring the EFOY Pro fuel cell. It can log data, email and SMS error warnings (i.e. low fuel), and allow the user to change set point parameters from anywhere.
Conduct easy updates with the aid of the EFOY updater. This handy device is connected to the switched-off fuel cell and the software update is carried out fully automatically.
Check the EFOY Pro’s current operating conditions, control the mode of operation and switch the DuoCartSwitch all from the Remote Control.
The USB Adapter is needed to connect the EFOY Pro fuel cell to a PC via USB-port.
Connect a computer to an EFOY Pro fuel cell with an Interface Adapter and a data line. This will allow you to retrieve information, modify operating parameters and operate the EFOY unit.
Service Fluid may be required if your EFOY Pro has been stored for extended periods, or if it has overheated. Empty the bottle back into the exhaust port if the Remote Control displays – “please refill service fluid”.